On Wed, Sep 14, 2005 at 07:52:26PM +0200, Sander wrote: > This is not a siemens pbx problem you set the > pridialplan = to national and that adds a number to the outgoing call or > something just use > > > Pridialplan = local > prilocaldialplan = local > > and it should work
no uuuaaaaaaa the same problem.. ring in the extension 100. > > I tried to open the file kds again and now it showed me your configuration > :) don't know why it did not show me before > > Sander > > -----Oorspronkelijk bericht----- > Van: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Namens Pablo Allietti > Verzonden: woensdag 14 september 2005 17:31 > Aan: Asterisk Users Mailing List - Non-Commercial Discussion > Onderwerp: [Asterisk-Users] Re: (no subject) > > On Wed, Sep 14, 2005 at 10:22:10AM -0400, Matt Ryanczak wrote: > > > ok. didnt work :( i thinks is a pbx problem. because E1 is incomming in the > pbx. and all incomming calls go to 100. thats the problem i will try to > solve this. > > > > > It could potentially be both. I would look at your extensions.conf > > first though. What does the extension entry for that context look like. > > > > For instance I have an entry in my extensions.conf for dialing outside > > lines (outside being from asterisk to my PBX and then onto the outside > > world from there). The entry looks like this: > > > > [to-analog] > > exten => _9XXX.,1,Dial(ZAP/G1/${EXTEN}) exten => _9XXX.,2,Congestion > > exten => _9XXX.,103,Hangup > > > > > > To dial a PBX extension the entry would look almost the same: > > > > [to-pbx-extension] > > exten => _9XXX.,1,Dial(ZAP/G1/${EXTEN:1}) exten => _9XXX.,2,Congestion > > exten => _9XXX.,103,Hangup > > > > Hope this helps, > > > > -Matt > > > > On Wed, 2005-09-14 at 11:46 -0300, Pablo Allietti wrote: > > > hi all, i have a box with a te110p and a pbx siemens... connect both > > > with a e1. > > > with a xten soft i can call extensions numbers in my office example > > > 100 > > > 102 etc. but when i truy to go outside with the 9 before the call > > > rings in the first extensions (100). this is a asterisk problem? or > > > a pbx problem? > > > > _______________________________________________ > > --Bandwidth and Colocation sponsored by Easynews.com -- > > > > Asterisk-Users mailing list > > Asterisk-Users@lists.digium.com > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > ---end quoted text--- > > -- > > .- > > Pablo Allietti > LACNIC > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users ---end quoted text--- -- .- Pablo Allietti LACNIC _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users