just an update for all curious folks I just replaced my FXS card and everything is working great .. I am running asterisk as non-root user.
Moreover, I couldn't figure it out how/why my FXS card got damaged. Thanks, > -----Original Message----- > From: [EMAIL PROTECTED] > Sent: Wed, 14 Sep 2005 06:44:45 -0800 > To: [email protected] > Subject: Re: [Asterisk-Users] Fedora Core 4 not recognizing X100P cards > > como'n folks.. ... > > > > > Well, as I told earlier.. my asterisk was running great with one fxo > and > > one > > fxs module of a TDM400P > > All i tried last night to run asterisk with non-root > > I must did something wrong while I was trying to do that > > > > FXO module on channel # 1 > > FXS module on channel # 4 > > > > /etc/zaptel.conf > > --------------------- > > loadzone = us > > defaultzone=us > > fxoks=1 > > fxsks=4 > > > > /etc/asterisk/zapata.conf > > -------------------------------- > > signalling=fxo_ks > > channel=1 > > signalling=fxs_ks > > channel=4 > > > > Did I made any mistake above? > > > > /etc/modprobe.conf > > ------------------------- > > install wcfxo /sbin/modprobe --ignore-install wcfxo && /sbin/ztcfg > > install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg > > # there have more line in it.. i guess they are not important here > > alias wcfxs wctdm > > > > /etc/rc.d/init.d/asterisk > > ----------------------------- > > #important lines are below > > start) > > /sbin/modprobe wctdm > > daemon /usr/sbin/asterisk > > > > stop) > > killproc asterisk > > /sbin/modprobe -r wctdm > > > > Here is the output of asterisk -vvvc > > Sep 13 22:18:11 WARNING[3982]: chan_zap.c:887 zt_open: Unable to > specify > > channel 1: No such device > > Sep 13 22:18:11 ERROR[3982]: chan_zap.c:6612 mkintf: Unable to open > > channel > > 1: No such device > > here = 0, tmp->channel = 1, channel = 1 > > Sep 13 22:18:11 ERROR[3982]: chan_zap.c:9990 setup_zap: Unable to > > register > > channel '1' > > Sep 13 22:18:11 WARNING[3982]: loader.c:403 __load_resource: > chan_zap.so: > > load_module failed, returning -1 > > Sep 13 22:18:11 WARNING[3982]: loader.c:543 load_modules: Loading > module > > chan_zap.so failed! > > > > see I have channel # 1 > > [EMAIL PROTECTED] ~]# ls -l /dev/zap/ > > total 0 > > crw-rw---- 1 root asterisk 196, 1 Sep 13 22:20 1 > > crw-rw---- 1 root asterisk 196, 2 Sep 13 22:20 2 > > crw-rw---- 1 root asterisk 196, 3 Sep 13 22:20 3 > > crw-rw---- 1 root asterisk 196, 4 Sep 13 22:20 4 > > crw-rw---- 1 root asterisk 196, 254 Sep 13 22:20 channel > > crw-rw---- 1 root asterisk 196, 0 Sep 13 22:20 ctl > > crw-rw---- 1 root asterisk 196, 255 Sep 13 22:20 pseudo > > crw-rw---- 1 root asterisk 196, 253 Sep 13 22:20 timer > > > > > > After all of this, if I comment out this from /etc/asterisk/zapata.conf > > /etc/asterisk/zapata.conf > > -------------------------------- > > ;signalling=fxo_ks > > ;channel=1 > > signalling=fxs_ks > > channel=4 > > > > My asterisk run fine .. I just dont able to use my phone set attaced to > > my > > fxs module. > > And all I had to do is .. forward all incoming call to my voicemail box > > !! > > > > Should I consider my fxs card has burnt out !! > > > > > > Thanks for reading.. hope someone will reply me to help. > > > > Thanks again, > > > >_______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
