On Wed, September 14, 2005 2:42 pm, Paul Dugas wrote: > After rebooting the SPA-3000, the internal users of calls routed through > the FXO interface hear pretty bad echo. This persists for days, maybe > more than a week. At some point, the echo goes away. I've noticed that, > when the echo is gone, I hear a rapid series of light clicks on the line > when placing a call; after dialing and before the remote end starts > ringing. When the *is* echo, I'm not hearing the clicks.
Per a suggestion, I swapped out the offending unit with a brand-new unit that came running 2.0.13(GWa) firmware. It's worked fine for the few test calls I just made. Will leave that in place for a couple days and see. If it stays working, I'll want to downgrade the firmware in the original unit. Is it safe to downgrade them? Thanks for all the suggestions, Paul -- Paul Dugas, Computer Engineer Dugas Enterprises, LLC [EMAIL PROTECTED] phone: 404-932-1355 522 Black Canyon Park http://dugas.cc fax: 866-751-6494 Canton, GA 30114 USA -- Onsite at GDOT W.Annex 404-463-2860 x199 _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
