Hi Peter 1) how to config callprogress=yes ? in extensions.conf? could you give me an example?
Not in extensions.conf, but in zapata. http://www.voip-info.org/wiki-Asterisk+config+zapata.conf In my case, busydetect=yes and busycount=5 were the key to getting it right. 2) you means record the call (via zaptel) into a file and analyze it with audio tool? In my case it was simpler. I had trouble with detecting the busy tone. So when I called the voicemail, it didn't detect the hangup, thus it kept recording the line (with the tone) until the tone stopped or the VM got tired of waiting. Then I received the WAV in my email... so in short I did not need to record it. Now, if you are detecting the busy tone, right, then you can record either by zaptel (I really don't know how) or an easier way, through the sound card of the machine you are calling from with a iax/sip softphone. Usually it is as easy as selecting the sound card record mode, and selecting the mixer channel. Now.. indications.conf, seems not only to define how to generate the tones, but also how to interpret them. At least, mine only worked once I changed those values. REGARDS! Alchaemist "Liu Peter" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] 1) how to config callprogress=yes ? in extensions.conf? could you give me an example? 2) you means record the call (via zaptel) into a file and analyze it with audio tool? thanks.. 2005/9/20, Alchaemist <[EMAIL PROTECTED]>: > Hi there, > > Basically, youare supposed to play arround with indications.conf > To have the extensions configured with callprogress=yes but, be > carefull because it is quite experimental. > Also, what I did was to get an audio program (Cooledit, Adobe > audition, or other), and you should use the spectral view (FFT Fast > Fourier > Transform), there you will be ableto see which frequencies the tones have, > and their duration. > > Now, having said that.... I was half successfull in making it work, > and I still have some problems, so if anybody else has a clear idea of > what > can be done, please shout in here ! :) > > > Give a look to this: > http://www.voip-info.org/tiki-index.php?page=Asterisk+config+indications.conf > Particullaryl the section: Generating a Tone Set > > And this: > http://www.speech.kth.se/wavesurfer/ > > Cheers! > Alchaemist > > > "Liu Peter" <[EMAIL PROTECTED]> wrote in message > news:[EMAIL PROTECTED] > I have a TDM card in a asterisk machine. > I found that once I used it to call out, the call status changed to > "connected" even the callee is still ring. > How could asterisk distinguish the "ringing" and "connected" in zap > channel? > > thanks. > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
