Hi, thanks for your replay Alex:
Right now a have an Asterisk server on a Dell Optiplex GX110 (PIII
666MHz, 320 RAM) with no soundcard.
With an X100P clone card (an ambient modem).
Everything looks good, I've been able to make local calls trough PSTN,
IAX, SIP.
I only have 1 POTS line, and 4 SIP softphones (X-lite) running all
right.
The only problem so far I have noticed (or realized of :P), it is
that i can make calls
to cellularphone numbers, * tries to connect but i get redirected to
the emergency service number 066.
I don't think it is because of my dialplan, eventhough I tried several
configurations. Anyways here is part of the dialplan
where my softphones make calls:
;########################################
;# Llamadas
salientes [outgoing]
#
;########################################
[outgoing]
include => toPSTN
include => iaxtel
include
=> fwd-iax
;######## -> PSTN ########
[toPSTN]
; Permite hacer llamadas locales (7-digitos sin contar 9)
ignorepat
=> 9
exten => _92XXXXXX,1,NoOp("Call for "${EXTEN:1})
exten =>
_92XXXXXX,2,Dial(Zap/1/${EXTEN:1})
exten => _904466XXXXXXXX,1,NoOp("Call for "(${EXTEN:1})
;Llamadas a Celular
exten =>
_904466XXXXXXXX,2,Dial(Zap/1/ww${EXTEN:1})
;######## -> IAXTEL ########
[iaxtel]
exten => _1700XXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten
=> _1888NXXXXXX,1,Dial( IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten
=> _1877NXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten
=> _1866NXXXXXX,1,Dial( IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
exten
=> _1800NXXXXXX,1,Dial(IAX2/[EMAIL PROTECTED]/[EMAIL PROTECTED] )
;######## -> FWD ########
[fwd-iax]
exten => _3.,1,SetCallerId,${FWDCIDNAME}
exten =>
_3.,2,Dial(
IAX2/${FWDNUMBER}:[EMAIL PROTECTED]/${EXTEN:1},60,tr)
exten => _3.,3,Congestion
;#########################################
;# Softphone
x-lite
#
;#########################################
[x-lite] ; Note: SIP extensions are defined here as "66" followed
by any two digits
include => default
include =>
servicios
include => outgoing
exten => 6600,1,NoOp(Llamada saliente maneja IAX2)
exten =>
6600,2,Macro(dial,kano00,IAX2/kano00,20,tr)
exten => _X,1,NoOp(Llamada saliente maneja SIP)
exten =>
_X,2,Macro(dial,667${EXTEN},SIP/667${EXTEN},20,tr)
All softphones working are SIP, and are directed to the [x-lite]
context.
This is my zapata.conf:
[channels]
language=es
context=incoming
signalling=fxs_ks.
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
rxgain=0.0
txgain=25.0
group=1
pickupgroup=1
immediate=yes
musiconhold=default
relaxdtmf=yes
; Relajar el DTMF, poner si asterisk salta o duplica algún DTMF,
; dando lugar a un número incorrecto.
channel =>
1
And my simple configuration file,
zaptel.conf:
loadzone=mx
defaultzone=mx
fxsks=1
As you can see this aren't complicated configurations because i only have
1 X100P card, and I am currently using little extensions.
Also, I am
not using AMP but I'm thinking to installing it over my current
installation. I installed asterisk and zaptel from instructions i
got from several documentations sites (voip-info wiki, digium, etc).
Well, I hope this info can help to look down the problem. Thanks
again,
Regards,
Claudio
_______________________________________________
--Bandwidth and
Colocation sponsored by Easynews.com --
Asterisk-Users mailing
list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
