Dear Richard and supporters! I see that you guys could be able to setup the SPA 3000 to connect to the asterisk thru the NAT. I don't know how would to do this. As my understand is that the SPA 3000 is just able to configure with the SIP that not NAT aware in Asterisk. I am trying to configure the SPA 3000 <----> NAT <-----> Internet < NAT> Asterisk, but I am unsuccess to do that. Also I have the SPA2100 and try to do the same thing.
If you guys could be able to do so. Would you PLEASE tell me how could I do that? or please direct me to the information where I can find out the way to setup that up! I am very appreciated Thanks in advance! Lan > > > Hi, > > > > I have a little situation here :( Perhaps somebody can give me a > > hand with it. > > > > I have an Asterisk working, and in another office, a Sipura > > SPA-3000. > > I configured the SPA and I have the extension working, the incomming > > trunk working, but the outgoing trunk (peer) does not work. > > > > The issue is that I have a dynamic IP where the SPA is, and neither > > the SPA nor my router have DynamicDNS. > > So, if I manually change the host for the peer for the SPA PSTN > > Line, then everything works fine, and I can make local calls through it. > > BUT when my router's IP changes... I am lost. (EVEN while the > > extension SPAN Line 1, or the incomming trunk are registered and DO work.) > > > > According to what I read, if I setup the outgoing trunk to type=peer > > with host=dynamic, then I can make the peer to register itself into the > > Asterisk, so the asterisk will know where to contact the peer. > > But.... I cannot figure out how to make the SPA register as the > > peer? I can make it register as a type=friend for the incomming traffic, but > > not as a peer.. > > Don't bother with the peer. > > Define both the Line1 and PSTN ports on the SPA to register with asterisk > using different UserID/Passwords for each, use port 5060 for one and 5061 > for the other, and in asterisk's sip.conf file define them as type=friend. > > It does work just fine that way. > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
