Is there anyway to prevent the BudgetTone from just doing a BIOS upgrade without consulting? I would be scared if my PC upgraded its BIOS at will. Uriel
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Andrew Kohlsmith Sent: Saturday, September 27, 2003 8:11 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Budgetone + NAT: Firmware Version? > All I can suggest is to just go over your settings and just make sure > that they are all correct and that nothing was "accidentally" changed > during the upgrade.. I'd go one further than that and have all the phones go to factory default, and then re-set all the parameters to what you want them to be. Perhaps locations changed in the NVRAM and while it seems to look like it's configured right, it isn't. Think of it as a PC BIOS upgrade -- you must do a factory default reset and then set your parameters again or you might end up with mostly working but infuriating little problems. Regards, Andrew _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
