You need to run a late 12.3T to get name passed via SIP.
Max Braz wrote:
Hi guys.
We have currently Asterisk CVS-v1-0-08/15/05-15:53:48
connected in SIP with a Cisco AS5300 (IOS 12.3). One
PRI is connected to the Cisco gateway.
The problem we have is that on incoming PSTN calls to
the AS5300, relayed in SIP to Asterisk, the callerID
name is not being transmitted. We received the
callerID number but no name. I know we are receiving
the name from the PRI in hexadecimal format (running
in debug mode) but the AS53003 doesn't do anything
with it.
We tried to setup remote-party-id in the Cisco and
setting trustripd=yes in sip.com but that did not
help. Also, I know we can send names to Asterisk from
the Cisco since I'm able to force the name on all
incoming calls from the PSTN -->router(config-sip-ua)#
calling-info pstn-to-sip from name set foo<-- The
callerid name foo is then displayed with the correct
callerid number for all incoming calls.
Debug mode in Asterisk shows that we are in fact
getting the remote-party-id header but no names in it.
Any ideas or suggestions?
Thanks,
Max
__________________________________________________________
Lèche-vitrine ou lèche-écran ?
magasinage.yahoo.ca
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
