Thanks for replying Alvaro but for me that same dialplan is not working. I know the digits are sent as the calling card menu doesn't come up and instead after a few seconds it says "the number you have dialed is invalid". I have tried putting in multiple w's but like I said, the problem is that the digits are sent before the call is bridged. I need to send it afterwards.
Let me know if you have any other solutions please. Thanks. Regards, Mohammed Salim Message: 1 Date: Sat, 24 Sep 2005 23:08:46 +0200 From: "Alvaro G. M." <[EMAIL PROTECTED]> Subject: Re: [Asterisk-Users] Send DTMF after call bridge To: Asterisk Users <asterisk-users@lists.digium.com> Message-ID: <[EMAIL PROTECTED]> Content-Type: text/plain; charset="iso-8859-1" On Saturday 24 September 2005 21:21, Mohammed Salim wrote: > Hello everyone. > > Let me first begin by explaining what I'm trying to do... > > I have a calling card that has an access number and requires a PIN to > be entered and then the number you want to dial, like normal calling > cards. So what I have done is assign a local DID which when called, > initiates a Dial to the access number of the calling card. > I'm in the same case and you, and the D(digits) options of Dial command works fine for me. I use it this way: exten => _9.,1,Dial(SIP/[EMAIL PROTECTED]||D(w6969w${EXTEN})) Where 6969 is my calling card number (or whatever). -- Alvaro Gamez Machado. [EMAIL PROTECTED] Hazent Systems, S.L. http://www.hazent.com C/Rio Caqamares 2, Oficina ocho 28804 Alcala de Henares Madrid _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users