I am wondering -- I have a tdm400p with two modules and I understand that there is a REV I of the card --- Ihave e/f. I am getting somepopping and I definitely need echo cancel when bridged. Now would a rev I help in these matters and how can I get them to replace mine without or with minimal charge -- if anyone knows how this is supposed to work, please let me know.
on Sunday 09/25/2005 Kevin P. Fleming([EMAIL PROTECTED]) wrote > Rod Bacon wrote: > > > Audio levels are better (have set tx and rx gains back to 0.0) and > > missed frames have gone (popping, clicking, etc.). Echo on bridged calls > > has also gone (I have now been able to disable echo cancellation on > > bridged calls, too!). > > Bridged calls with 2nd gen firmware result in the audio never leaving > the card; that's why you are seeing such an improvement. Essentially, > the Zaptel 'native bridge' is pushed all the way down into the card, so > the audio stream is never passed across the PCI bus (it's not even > packetized, just directly connected between the two channels). > > Glad to hear it was worth the time it took to get to you! > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users