Hi Ade, An example of oh323.conf is attached, and the lines in the extensions.conf that make the choice os this oh.323 channel is:
[globals]
GK => OH323/IP of your GK
[local]
ignorepat => 0
exten => _0021NXXXXXXX,1,Dial(${GK}/${EXTEN:1})
exten => _0021NXXXXXXX,2,Congestion
--
[ ]'s
Daniel Varella de Oliveira
Tecnologia IP Ltda
Tel.: +55 (21)3139-4091 / r. 108
www.tecnologiaip.com.br
On Monday 26 September 2005 13:33, Ade Agbero wrote:
> Hello,
>
>
>
> I want to send oH323 calls to our Quintum D3000.
>
>
>
> I have installed oH323 but I need a working sample oh323.conf and
> extensions.conf, so that I can route specific calls to the Quintum using
> H323.
>
>
>
> For example our Asterisk box IP=192.168.10.100 and Quintum
> IP=192.168.10.101.
>
>
>
> Can anyone assist with a sample Extensions.conf and oH323.conf.
>
>
>
> Thank you,
>
>
>
> Ade.
>
>
>
>
>
>
>
>
> ---------------------------------
> Yahoo! Messenger NEW - crystal clear PC to PC calling worldwide with
> voicemail
;
; Configuration file of OpenH323 channel driver
;
;-----------------------------------------
; General configuration options
; (ports, jitter, GK, ...)
;-----------------------------------------
[general]
;
; Address to bind to for incoming connections.
; Default is ALL.
;
listenAddress=0.0.0.0
;
; Port to listen to.
; Default value is 1720.
;
listenPort=1720
;
; Configure the TCP port range to be used by H.323
;
tcpStart=10000
tcpEnd=20000
;
; Configure the UDP port range to be used by H.323
; Note: The port range used by RTP are configured from
; "rtp.conf"
;
udpStart=10000
udpEnd=20000
;
; Enable fast start (yes,no).
;
fastStart=no
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=no
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=no
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;
inBandDTMF=no
;
; Set jitter buffer (in milliseconds, 20...10000).
;
jitterMin=20
jitterMax=100
;
; Set IP Type-of-Service byte for RTP channels.
; Valid values for this option are:
; lowdelay, throughput, reliability, mincost, none
; Moreover, an integer (in decimal or hex format) may be entered.
;
ipTos=none
;
; Set the maximum number of inbound/outbound/simultaneous
; H.323 connections.
;
outboundMax=10
inboundMax=10
simultaneousMax=10
;
; Call Rate Limiter params (ingress direction). When the total number
; of active calls is above 'crlThreshold' then the rate of the incoming
; H.323 calls is restricted in a way where no more than 'crlCallNumber'
; calls are allowed in 'crlCallTime' milliseconds, thus limiting the rate
; of incoming calls to:
; 'crlCallNumber' / ('crlCallTime' / 1000) Calls-per-Sec.
;
;crlCallNumber=20
;crlCallTime=20000
;crlThreshold=30
;
; Set the bandwidth limit for H.323 connections.
; The value is in Kbps.
;
;bandwidthLimit=1024
;
; Set tracing options for the wrapper library and for the
; OpenH323 library.
; libTraceFile can be 'stdout' or a full path name to the tracefile.
; Only the trace info for OpenH323 is logged in libTraceFile.
;
wrapLibTraceLevel=3
libTraceLevel=3
;libTraceFile=stdout
libTraceFile=/var/log/asterisk-h323.log
;
; Disable gatekeeper or specify a gatekeeper. The gatekeeper's ID is the zone
name.
; Valid values for this option are:
; DISABLE,
; DISCOVER,
; <gatekeeper's DNS name>,
; <gatekeeper's ip>,
; GKID:<gatekeeper's id>
; <gatekeeper's id>@<gatekeeper's name or address>
;
gatekeeper=IP of your gatekeeper
;gatekeeper=DISABLE
;
; Set the gatekeeper password. If used, it enables H.235 access to gatekeeper.
;
;gatekeeperPassword=secret
;
; Set the gatekeeper registration timeout. Before the expiration of
; the timeout, a re-registration is attempted.
;
gatekeeperTTL=600
;
; Set the mode for sending user-input (DTMF)
; Valid values for this option are:
; Q931 - Q.931 Keypad Information Element
; STRING - H.245 string
; TONE - H.245 tone
; RFC2833 - RFC2833
;
userInputMode=TONE
;
; AMA flags (default, omit, billing, documentation)
;
amaFlags=default
;
; Account code
;
accountCode=H323
;
; Default language
;
language=en
;
; Default Music-On-Hold class
;
musiconhold=default
;
; Set the default context of H.323 calls.
;
context=voip-h323
;-----------------------------------------
; Configure H.323 aliases, prefixes and
; related ASTERISK's contexts
;-----------------------------------------
[register]
;
; Aliases/prefixes associated with the default context
; defined in section [general].
;
;alias=asterisk
;alias=123
;
; Aliases/prefixes routed in "all-aliases" context.
;
context=all-aliases
alias=asterisk
alias=99001701
alias=99001702
;
;
; Aliases/prefixes routed in "more-aliases" context.
;
;context=more-aliases
;alias=665
;
; Aliases/prefixes routed in "all-prefixes" context.
;
;context=all-prefixes
;gwprefix=00
;gwprefix=01
;
; Aliases/prefixes routed in "more-stuff" context.
;
;context=more-stuff
;alias=664
;gwprefix=02
;[cisco2]
;type=h323
;e164=02124950937
;context=all-aliases
;-----------------------------------------
; Specify and configure CODEC related
; options
;-----------------------------------------
[codecs]
;
; Define the codec list of the channel driver.
; Every "codec" option may have a "frames" option
; associated with it.
; Valid values for the "codec" option are:
; G711U - G.711 u-Law
; G711A - G.711 A-Law
; G7231 - G.723.1(6.3k)
; G72316K3 - G.723.1(6.3k)
; G72315K3 - G.723.1(5.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G7231A6K3 - G.723.1A(6.3k)
; G726 - G.726(32k)
; G72616K - G.726(16k)
; G72624K - G.726(24k)
; G72632K - G.726(32k)
; G72640K - G.726(40k)
; G728 - G.728
; G729 - G.729
; G729A - G.729A
; G729B - G.729B
; G729AB - G.729AB
; GSM0610 - GSM 0610
; MSGSM - Microsoft GSM Audio Capability
; LPC10 - LPC-10
; Number of frames in RTP packet (if not specified) is 1.
;
codec=G711A
frames=20
;codec=G711U
;frames=20
;codec=GSM0610
;frames=4
;codec=G7231
;frames=2
;codec=G729
;frames=2
pgpyxcFx6ecs5.pgp
Description: PGP signature
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
