Hi Marco, As far as I can recall, the IBM setup utility can enable you to change the IRQ of the SCSI controller. In addition, I've never seen a WildCard board bound to IRQ7 on any box, which is very weird in it self. I'm flying over to Ireland today (actually, at the airport right now), and I'm coming back on Sunday. If You'd like, you can bring your box to my office after Rosh-Hashana, and I'll try to help you out.
Nir S -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marco Supino Sent: Monday, September 26, 2005 10:06 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] IBM x306 - some progress Hi, I asked yesterday about a problem with x306 and IRQ sharing, didnt get much info, now, i was playing with lspci, and see something strange, lspci -v shows me the TDM400P card is on IRQ 7, and the SCSI card is also on IRQ 7, lspci -bv (from the man - b - shows "bus-centric view, as seen by the BUS and not by the kernel) shows me the TDM400P is on IRQ 5, why does the kernel puts it on IRQ 7 ? any insights much appriciated. Marco. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
