On Mon, 26 Sep 2005, Francesco Peeters wrote: > Trying again... > > *Summary:* > I need to have 2 machines with 4 BRI connections, 2 in NT mode, 2 in TE > mode and 1 machines with 2 BRI connections, 1 in NT mode, 1 in TE mode; > What card(s) should I put in to these servers? > > *The long story:* > I have 3 locations I want to connect using (*) servers. > > 1 of those has a single BRI with a Siemens DECT PABX. > 1 of those has two BRI's with 2 Siemens DECT PABX's, each serving a > different area. > 1 of those has two BRI's and a 2 port Nova Compact PABX with DECT > > First step would be to set up the (*) servers and have them > interconnected. When all of that works we'd go on to connect them to the > ISDN and connect the existing PABX's to the servers so we can - for now - > maintain the existing environment but use (*) to route traffic on a least > cost basis, as well as allow SIP/IAX connections from out of office > locations. > > The machines themselves will not pose much of a problem, but what ISDN > hardware would you recommend for this? (1 site with 1 TE and 1 NT mode > port, 2 sites with 2 TE and 2 NT mode ports)
I cannot compare with other cards, but I recommend the Eicon DIVA Server Cards (like 4BRI). I only use them and they work very good. Armin _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
