Hi, And I have the digium's hardware too in one of my PCI slots.
Regards, Somesh S. Shanbhag --- somesh s <[EMAIL PROTECTED]> wrote: > Hi, > > I know some bits about zaptel.conf and zapata.conf > but > > problem is modules wctdm, wcfxo, wcfxs are not > getting > loaded. > > modprobe zaptel is successful! > > Regards, > Somesh S. Shanbhag > > > > --- Tzafrir Cohen <[EMAIL PROTECTED]> wrote: > > > On Sun, Sep 25, 2005 at 11:50:06PM -0700, somesh s > > wrote: > > > Hi, > > > > > > I got the following output when I run the > command. > > > > > > >>>>>>>>>>>>>>> genzaptelconf -svd > > >>>>>>>>>>>>>>>> > > > > > > ./genzaptelconf: line 616: /etc/init.d/asterisk: > > No > > > > The script assumes that there is an > > /etc/init.d/asterisk script. > > > > Please stop asterisk manually. > > > > > such file or directory > > > Unloading zaptel modules: > > > wcusb zaptel > > > Test Loading modules: > > > - zaptel > > > - zaphfc > > > - qozap > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wctdm > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wcfxo > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wcfxs > > > - pciradio > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - tor2 > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - torisa > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wct1xxp > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wct4xxp > > > Hint: insmod errors can be caused by incorrect > > module > > > parameters, including > > > invalid IO or IRQ parameters. > > > You may find more information in syslog or > > the > > > output from dmesg > > > - wcte11xp > > > - wcusb > > > - ztd_eth > > > > It tries and fails to load many modules. This is > > expected, as you don't > > have their hardware. > > > > However can you load any zaptel module using > > modprobe? > > What's the output of: 'lsmod | grep zaptel' > > > > BTW: if you have a good idea of what should be in > > zaptel.conf and > > zapata.conf, I figure you should write them > manually > > and not waste too > > much time on that automated script. It is meant to > > save time, not to > > spend time. > > > > > Updating '/etc/default/zaptel' > > > Generating '/etc/zaptel.conf' > > > Generating '/etc/asterisk/zapata-channels.conf' > > > Reconfiguring identified channels > > > > > > Zaptel Configuration > > > ====================== > > > > > > > > > Channel map: > > > > > > > > > 0 channels configured. > > > > > > ./genzaptelconf: line 653: /etc/init.d/asterisk: > > No > > > such file or directory > > > Checking channels configured in Asterisk: > > > ./genzaptelconf: line 665: asterisk: command not > > found > > > > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> > > > > > > What may be the problem? Help me in this regard. > > > > > > Regards, > > > Somesh S. Shanbhag > > > > > > --- Tzafrir Cohen <[EMAIL PROTECTED]> wrote: > > > > > > > On Sun, Sep 25, 2005 at 10:42:52PM -0700, > somesh > > s > > > > wrote: > > > > > Hi, > > > > > > > > > > Can you please give me some details about > the > > link > > > > > you have sent? I am not aware of what it > does? > > > > > > > > > > [http://tzafrir.org.il/genzaptelconf] > > > > > > > > It is a bash script for generating zaptel.conf > > and > > > > zapata.conf according > > > > to the current settings. > > > > > > > > To use it: > > > > > > > > wget http://tzafrir.org.il/genzaptelconf > > > > bash genzaptelconf -h # gives help > > > > > > > > Try -s and -v . -d is probably not recommended > > if > > > > you have more thn one > > > > card, I figure. > > > > > > > > > > > > > > > > > > Regards, > > > > > Somesh S. Shanbhag > > > > > > > > > > --- Tzafrir Cohen <[EMAIL PROTECTED]> > > wrote: > > > > > > > > > > > On Fri, Sep 23, 2005 at 06:22:06AM -0700, > > somesh > > > > s > > > > > > wrote: > > > > > > > Hi Steve, > > > > > > > > === message truncated === __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
