Alberto,
 
PA168 chip does not have Hold and Transfer features on it until firmware version 1.44. Atcom never claimed that
these will work as the Pa168 firmware is still under development.
 
Yesterday I met Peter Sun, President and owner of Atcom China,  in New York. He is here to attend VON in Boston.
I have enquired about the fix for this and he said that Hold and Transfer are working with 1.45 Firmware.
I mentined that this is not the case with the phones we tried to use here.
 
Peter mentioned that firmware version 1.46 is going to be relased this week, which will provide these features
and also the Voice Mail Messages Indicator Led should work too.
 
I am waiting for this firmware to be released. I will forward this to you as soon as it is released. In the meantime you
can check for the updates at http://www.iareaphone.com under downloads, if this becomes available sooner.
 
Seshu Kanuri


From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alberto Risco
Sent: Tuesday, September 27, 2005 9:06 AM
To: [email protected]
Subject: [Asterisk-Users] IAX2 hard phone

I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer.  I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work.  When you press the hold button, it rings endlessly, the transfer button, displays “transferring” but it does nothing.  Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone.

 

 

Thanks,

 

Alberto

 

The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any.


NOTICE: If received in error, please destroy and notify sender.  Sender does not waive confidentiality or privilege, and use is prohibited.

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to