Hello Alberto, You must upgrade the firmware by taking the last one at www.aredfox.com which is the PA168 manufacturer. Mine Ip-phones are running well with IAX2 and flash hook for transferts.
Good luck. Best Regards, Francois BERGERET, France. -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Alberto Risco Envoyé : mardi 27 septembre 2005 15:06 À : [email protected] Objet : [Asterisk-Users] IAX2 hard phone I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US retailer. I was able to configure the phone to work with my Asterisk box, except the hold and transfer buttons do not work. When you press the hold button, it rings endlessly, the transfer button, displays transferring but it does nothing. Has anybody with these phones run into similar problems? Or can recommend a good functional IAX2 hard phone. Thanks, Alberto The contents of this email message and any attachments are confidential and are intended solely for addressee. The information may also be legally privileged. This transmission is sent in trust, for the sole purpose of delivery to the intended recipient. If you have received this transmission in error, any use, reproduction or dissemination of this transmission is strictly prohibited. If you are not the intended recipient, please immediately notify the sender by reply email and delete this message and its attachments, if any. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
