I'm wondering whether there's a problem with the blindxfer and atxfer commands.
I was using Asterisk STABLE and pressing the # key to transfer calls worked fine, except of course when you called up FedEx and they asked "Enter the number of packages, followed by the Pound key". I found on the wiki (http://www.voip-info.org/tiki-index.php?page=Asterisk+config+features.conf) that updates had been made to address this very problem, so I went to CVS HEAD and updated features.conf: [featuremap] blindxfer => *1 ; Blind transfer disconnect => *0 ; Disconnect atxfer => *2 ; Attended transfer Now, when a call comes in, I can press *1 and I hear "Transfer", at which point I enter an extension and the call goes there. However if _I_ initiate the call, *1 does nothing - I cannot transfer the call. Same story for attended transfer (*2). It doesn't make any difference whether I place the call on a SIP or ZAP channel. Is this a bug? If not, what's the secret to transferring outgoing calls that I initiate? BTW, I have calltransfer=yes on ALL my ZAP channels and I'm using t in my Dial commands (I noticed that using T doesn't help – the called party can't transfer the call either). Thanks, Hugh
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
