On 9/28/05, Michael Blood <[EMAIL PROTECTED]> wrote: > > Anybody ever run into a case where the Sipura Dial Plan will not work with > the S0 option to immediately connect? > > My Dial plan reads > (*xx|[3469]11S0|0|00|[2-9]xxxxxxS0|1xxx[2-9]xxxxxxS0) > > and I can dial ONLY then numbers in the dial plan so I know that it works. > > For some reason when I dial 5551212 1212121212 > It does not dial for a while and then it dials 555 1212
Hi Michael, I think the problem lies in the S0 suffix that you're adding to the sequence. Last time I played with the Sipura dial plans I thought S0 and L0 were set dial-plan wide, and not on an individual sequence basis. ie: S:0 ( *xx | etc ) (short timeout: 0) ... or: L:0,S:0 ( *xx | etc) (long timeout: 0, short timeout: 0) Check the Appendix in the SPA2000 User Manual to see the format of the dial plan. HTH, Gonzalo _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
