> Subject: Re: [Asterisk-Users] Zap FXO/FXS issues, 1.2.0-beta1 Rich Adamson <[EMAIL PROTECTED]> wrote:
> > We're having issues with the FXO/FXS ports on our Digium TDM cards > > sporadically. I'm wondering if anyone else has had these problems, or if > > anyone can provide guidance diagnosing or fixing the issue? > > > > > > The symptoms are that the FXO and FXS ports "stop working", usually > > after 2-4 weeks of server uptime. When this happens, sending a (SIP) > > call to an analog phone on an FXS port causes the phone to ring, but > > when you answer the phone, the off-hook is not detected. Further rings > > sound like clicks in the off-hook handset. If the handset is hung up, > > ringing resumes. > > The digium analog TDM card (four modules) with early revision > numbers (rev E/F and before) had a problem where the card fails to > respond every week (or more). Stopping asterisk, stopping the drivers, > and reloading the drivers would cause the card to work again. > > If that sounds like a match for your problem, contact digium support > as the card is still under warranty. Replacing it fixed the problem for > me. This is our problem, and zttool reports our board revisions as E/F for both. Thanks for the pointer! I'll get right on it. Alan Ferrency pair Networks, Inc. [EMAIL PROTECTED] _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
