I've had the same problem. But it was due to a silly mistake: I followed the instructions on their web site literally (should have known better ;)). For asterisk as your BYOD device, they tell you all the steps except for one - you need to include an instruction in your dialplan for the incoming number. So if your number is 123-4567 in the 890 area code, you'd need something like
exten => 8901234567,1,Answer exten => 8901234567,2,Dial(Zap/g1,20,20) exten => 8901234567,3,Hangup in your dialplan. (example for forwarding the call to an analog phone, but works the same for a SIP extension). It's missing from the docs, but after inserting this section, everything started working for me. HTH Klaus --- Rene Nelson <[EMAIL PROTECTED]> wrote: > My SIP seems to be configured correctly as I can dial out and my minutes > show up on my broadvoice bill, but whenever anyone calls my broadvoice # > inbound they just get a busy signal. I dont get anything in the logs saying > anything came in from broadvoice at all. > > Has anyone had this/simmilar problem with inbound from Broadvoice? Any > suggestions? > > Thanks > > Neri > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
