Derek, I've got up to 3 Fritz cards (of different types) up and running on my debian sarge (2.6.8 kernel).
That's how it should work: - build and install mISDN and chan_misdn from the current install-misdn.tar.gz which can be downloaded from http://www.beronet.com/download/ - use the chan_misdn and change /etc/asterisk/misdn.conf according to your special config - be sure that no capi modules are loaded - do "/etc/init.d/misdn-init config" to automatically create /etc/misdn-init.conf - start the cards: "/etc/init.d/misdn-init start" - start your * and check if chan_misdn.so started properly Hope it helps Cheers Jörg > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Derek Conniffe > Sent: Friday, September 30, 2005 10:39 AM > To: [EMAIL PROTECTED]; Asterisk Users Mailing List - > Non-Commercial Discussion > Subject: Re: [Asterisk-Users] Fritz, mISDN, Help > > I big problem (for me) is that it seems that the AVM Fritz > CAPI drivers cannot support more than one PCI card per > server. There is a hack out there for multiple cards and a > 2.4.XX kernel but this is not supported for the 2.6.XX kernels. > > mISDN on the other hand does support multiple AVM Fritz cards > but I couldn't seem to get mISDN -> CAPI -> chan_capi working > right (I tried for hours and I can't remember what exactly > the problem was now - everything did load OK but calls were > not being received correctly I think). I didn't try using chan_misdn. > > Now I'm running a solution which does not make me happy at > all - I've got a second asterisk box beside the main one for > the other AVM Fritz ISDN card and sending the received calls > over via. IAX2 to the primary server (I shudder when I think > of the waste of electricity). > > Is anyone out there running two AVM Fritz ISDN cards? Are > you using a 2.6.XX kernel? How are you doing it? > > Thanks, > > Derek > > > > Konrads Smelkovs wrote: > > >Unfourtunatley, mISDN is far from production quality. So going > >miSDN->CAPI->chan_capi might not work. chan_misdn is even more flakey > >at the moment. > > > >Your best option is to use just CAPI and chan_capi,it had > support for > >fritz > > > >On 10/09/05, Jon Dean <[EMAIL PROTECTED]> wrote: > > > > > >>A plea to all! > >> > >>Has anyone had any success with two or more avm fritz pci > cards with > >>either misdn, chan_misdn, or chan_capi, and any version of > linux 2.6.x? > >> > >>I have managed to get misdn to load under 2.6.13 and detect > two cards > >>using misdn-capi and chan-capi (using capiinfo and capi info under > >>asterisk) - but the second card/controller doesn't answer > or dial calls. > >> > >>But if I try misdn without capi I get the following error > >> > >>mISDN: INTERNAL ERROR in drivers/isdn/hardware/mISDN/stack.c:596 > >> > >> > >>Any help would be greatly appreciated. > >> > >>Jon > >>_______________________________________________ > >>--Bandwidth and Colocation sponsored by Easynews.com -- > >> > >>Asterisk-Users mailing list > >>[email protected] > >>http://lists.digium.com/mailman/listinfo/asterisk-users > >>To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > >> > >> > > > > > > > > > > > -- > Derek Conniffe > Rivertower Ltd > DID Number: 01 440 1806 (International: 00 353 1 440 1806) > Ireland: (Freephone) 1800 719 400 > Ireland: (Local) 01 440 1800 > United Kingdom: 0870 068 2368 > International: 00 353 1 440 1800 > Derek Conniffe Mobile: 086 856 3823 (International: 00 353 86 > 856 3823) > Fax: 01 201 0085 (International: 00 353 1 201 0085) > Email: [EMAIL PROTECTED] > Web: http://www.rivertowerhosting.com > > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
