Guys, I've been
poking around trying to find a good answer for this via voip-info, google,
etc... Haven't found anything that helps, so maybe you mates
could.
A lot of my
customers are using Linksys UAs (router/ATA PAP2) and some using Sipura
SPA-2002s. Every once in a while, the customer will get one-way audio. I've read
that this is commonly caused by the outgoing RTP port not being the same as the
incoming RTP port. A lot of other devices (I found info on forcing Xten to do
it) can be forced to use the same port for both, but these devices don't have an
option (that I've been able to find, even in the provisioning configs) to do
this. So, my question is two-fold:
1. Can Asterisk be
told to send the RTP stream for incoming and outgoing always on the same set of
ports?
2. Does anyone know
something that I'm missing for the above mentioned devices? They're all the 2
line version of the ATA and/or router configs (wireless and
wired)
Thank you all in
advance for your thoughts and comments. I apologize in advance if I missed
something that was publicly available.
Sherwood McGowan
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
