do you think it would make any difference to change the process-priority if zttest is the only running process except ssh-daemon and the login-shells ?
[EMAIL PROTECTED] wrote on 30.09.2005 18:11:47: > Are you starting Asterisk with the -p option (high priority?) > > Also, do you get a different value if you run zttest this way: > > nice -n -20 zttest > > Carlos > On 9/30/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Digium itself is saying their cards may work not properly with zttest > results below 99,98 > the card itself is working the way that we can call out and receive > calls, but we encountered massive echo-problems - sometimes more, > sometimes less even on lines within the same phone-provider and be sure > that we've been messing around with all other possible > parameters for weeks without any result. Until now we've got a setup that > we can live with at least until we get different hardware. > It's really worse calling someone and missing the name the called person > said then picking up the phone in cause of echo-cancelling > parameters or even think the line is dead, or if you've got massive echoes > and it takes about 30 seconds to filter them out if at all. > > Dirk > > [EMAIL PROTECTED] wrote on 30.09.2005 16:34:18: > > > [EMAIL PROTECTED] wrote: > > > just as an (bad) example: > > > we are using an x206 and couldn't get the zttest above 99.975 > > > equal what we were doing > > > single irq, w/o acpi, w/o apic, different kernels, w/o > > > hyperthreading, different slots, a.s.o. > > > for an Digium wildcard TE110P > > > > > > so if someone got such a board to zttest 100% maybe could give some > > > information if where's something > > > special to run asterisk on such boards... > > > otherwise I think there are production differences on the > ibm-mainboards > > > or the used chipsets > > > > > > we'll change hardware next... > > You don't have to have 100% on zttest. You probably won't get it. I > > get the same results on one of my servers and it runs perfectly. > > > > Kevin _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users