maybe your phones (polycom 50?'s if I remember right) have the priority
configured to place ulaw above g729? It's in your ipmid.cfg (if you do
use polycoms) or maybe your sip.cfg if you've upgraded to SIP 1.5.2 and
migrated your config files
Crystal Stream, Incorporated wrote:
Hello,
I have VPC (Voice Pulse Connect) and NuFone for
providers and I have setup modules.conf with the
registered (Digium) G.729 Codec such as:
load => codec_g729a.so
load => res_crypto.so
With both sip/iax2 configuration disallow=all is first
and then allow=g729 is next
(allow=ulaw,allow=alaw,allow=gsm are next after
allow=g729) and it always dials via ulaw.
Why is this happening?
Josh
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Mojo <[EMAIL PROTECTED]>
Office Manger, Horan & Company, LLC
(907) 747-6666 x112
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
