Lilantha, the tones are supposed to be switched using the loadzone and
defaultzone lines in /etc/zaptel.conf , and, progzone in
/etc/asterisk/zapata.conf.
The information about countries and frequencies/times are at
zonedata.c located in the sourcecode of zaptel. As you may know,
changing zonedata.c information requires a re-compilation of the zaptel
module.
Hope it helps,
Ricardo Poppi.
Date: Wed, 5 Oct 2005 19:02:23 +0800
From: "Lilantha Karunaratne" <[EMAIL PROTECTED]>
Subject: [Asterisk-Users] Zaptel tone description
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<[email protected]>
Message-ID:
<!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA2xL2SF4ybEylW69jV2juZcKAAAAQAAAAJ0Zvf9/YaUil/[EMAIL
PROTECTED]>
Content-Type: text/plain; charset="us-ascii"
Hi,
We're trying to use TDM04B with a few analog switches and we've noticed that
it works with the tones from USA only. As it's documented saying that those
tones are hard-coded in the source for analog cards.
We'd like to know if there's anyone who could tell us under which file these
settings would be hard-coded as we could like to do some experiments which
will benefit to all Zaptel / Asterisk users in Asian part of the world.
Would appreciate an early reply.
Cheers!
Lilantha Karunaratne MSCS
Tel: (65) 90403497
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
