Juanjo, can you provide some more detail about which version you are using both for asterisk and OpenH323, the hardware dimensioning and the amount of traffic you manage with this solution: how many lines, codecs you use?
We should manage a full blown PRI (30 channels), the server is SuperMicro with P4DP8G2 motherboard, dual Xeon 2,8 GHZ, 2 GB RAM and dual SCSI 15K HD in RAID 0. We plan to use G729 codec and a Digium TE110P Card. Any detail will be very useful.... brgds Francesco Pellegrini +--------------------------------+ | Frame Srl | | Via Antonio Cantore 62/10 | | 16149 Genova | | Tel. +39 010 8680570 | | Fax. +39 010 6591413 | | Cell. +348 2237798 | +--------------------------------+ On 10/4/05, Juan Jose Comellas <juanjo at comellas.com.ar> wrote: > I have setup Asterisk with chan_oh323 to connect to the PSTN over H.323 in > Buenos Aires, Argentina. Currently I'm using direct connections to the > telephone company's (iplan) H.323 gateway, but I'm working on using an > intermediate H.323 gatekeeper to take advantage of the telephone company's > redundant servers. I think the telco uses Cisco hardware, but I'm not > completely sure. > > We've just started using this, but it seems stable so far. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
