> I'm running an Asterisk 1.09 box, and a W2k Server with ISA 2000 > > I would like to configure ISA to allow SIP calls. > > I've configured the router to pass port 5060 (TCP&UDP) to the ISA server, > and ports 10000-10020 (TCP&UDP) to the ISA server. > > My question is, how do I configure ISA? I presume I need to define > "protocol definitions" and a server publishing rule, however I am confused > on how to do this. > > When adding a UDP protocol definition there are many direction options: > Receive > Send > Receive/Send > Send/Receive > > Any help, greatly appreciated!
I'd swear the ISA server is the world's most difficult firewall to configure since MS decided to invent their own wording and functions that have no resemblance to anything else in the real world. Worked with it on one project (and have had to properly config many different vendors firewalls), and decided to replace it with a real fw. Their terminology is so bad that even a wild guess will lead to open holes that you'd never guess were open. Replace it with something that is sip aware. A $40 linksys can probably do a better job. _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
