Hi all, I've got a TE410p connected via T1 to four channel banks (2 FXO and 2 FXS), no PRIs.
Some users are complaining that they hear clicks and pops on the FXS lines, generally when they pick up the phone it's noisy. This happens only after a while, e.g. after a fresh restart of everything, all is fine but after some time these noises start appearing. From what I've read on the list, this could be down to frame slips or some problem due to synchronization.
Since there's no incoming PRI to sync to, this means everything needs to be internally clocked. Could it be the internal clock source on the card has gone wonky? Or is something else in the server screwing up the clock signal?
Anyone else experienced this when connecting four channel banks to the TE410? Zaptel.conf: span=1,0,0,esf,b8zs fxsks=1-24 span=2,0,0,esf,b8zs fxsks=25-48 span=3,0,0,esf,b8zs fxsls=49-72 span=4,0,0,esf,b8zs fxsls=73-96 TIA, flynn _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
