On 10/8/05, Rich Adamson <[EMAIL PROTECTED]> wrote: > > I am using Teliax to terminate my calls, and I have 3 licenses' for > > g729 from Digium. "show translations" verifies that the registration > > took place. > > > > When I place a call, having "allow=g729" as the only allow option in > > iax.conf, I get the following error: > > > > WARNING[361]: chan_iax2.c:6017 socket_read: Call rejected by > > 208.139.204.228: Unable to negotiate codec > > > > If I place a call with g726 as the only allow line, then the call > > completes as desired. I realize I could just use that (g726), but > > it seems odd that I cannot connect using g729 when both of us support > > it. > > > > I have checked, double checked, triple checked my account with teliax, > > and made sure that the g729 box is checked for both sip and iax. I > > have also contacted support, they have responded, but not with > > anything that would be considered helpful. > > > > My question then to you all is this: Are you connecting to Teliax via > > g729? if so, how... what are you doing that I might be missing? > > > > Your guidance will be most appreciated. > > I just tried g729 with teliax this morning. It worked fine in both > directions using three different did's from them. I did have one > test call where audio was one way though. > > During those test calls I watched the CLI and the calls definitely > were g729 without a doubt. I used the exact same teliax server you > show above. > > I'm running cvs-head from yesterday. > > If you do a iax2 debug, you should be able to spot which system is > not compat with g729. That should lead you into diagnosing the > problem a little deeper. >
Rich, Thanks for taking the time to check and respond, and for your advise. I did as you said, and here is the output: ============================ pbx*CLI> iax2 debug IAX2 Debugging Enabled Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00016ms SCall: 00002 DCall: 00000 [208.139.204.228:4569] VERSION : 2 CALLED NUMBER : 1917XXXXXXXX (I XXX out the number) CODEC_PREFS : (g729) CALLING NUMBER : 4401 CALLING PRESNTN : 0 CALLING TYPEOFN : 0 CALLING TRANSIT : 0 CALLING NAME : John Reynolds LANGUAGE : en USERNAME : reynj FORMAT : 256 CAPABILITY : 63744 ADSICPE : 2 DATE TIME : 189432385 Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00003ms SCall: 00073 DCall: 00002 [208.139.204.228:4569] AUTHMETHODS : 2 CHALLENGE : 303570605 USERNAME : reynj Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: AUTHREP Timestamp: 00080ms SCall: 00002 DCall: 00073 [208.139.204.228:4569] MD5 RESULT : 6006ef53daa295d58f5292837a4edb60 Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002 Type: IAX Subclass: REJECT Timestamp: 00060ms SCall: 00073 DCall: 00002 [208.139.204.228:4569] CAUSE : Unable to negotiate codec CAUSE CODE : 58 Oct 10 16:18:03 WARNING[364]: chan_iax2.c:6017 socket_read: Call rejected by 208.139.204.228: Unable to negotiate codec ================= I am I wrong in thinking that I my call is trying to connect via g729, but that Teliax is rejecting it? Thank you, JR _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users