Geoff Manning wrote:
We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get
over 500 frame errors and over a 500 slip errors per hour. When the
errors
reach 1000 per hour the Mitel will take it's T1 card offline. At that
point
no calls can be routed from the Asterisk server to the Mitel and the
TE110P
reports a Yellow alarm.
What can be causing all these Frame and Slip errors? We have been working
with a Mitel tech to get all the configurations correct and we still
haven't
been able to resolve the issue.
We are currently connecting via crossover so we'll try a straight through
just for kicks. We have a spare TE110P so we are going to try that. I
just
don't know enough about these errors to know what to try next.
Any other thoughts?????
span=1,1,0,d4,ami
e&m=1-24
Looks like you have told Asterisk to get it's timing from the Mitel.
I'll bet the Mitel is trying to get it's timing from Asterisk.
Try span=1,0,0,d4,ami and run ztcfg -vvv
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
