I'm trying to figure out what an appropriate deployment model might be.
Whether to have iaxmodem installed on the hylafax server with a switched
ethernet connection for iax2 to the * server with the PRI, or to have the
iaxmodem on the PRI * server and channel the tty comms across the network.
I suspect that the latter might work ok over a WAN so I could have a central
hylafax server with distributed * servers running iaxmodem at the far end of
wan links (up to 100ms latency). The only issue is that I want to retain
rxfax on the PRI * servers for incoming faxes.
Lee, if I install iaxmodem on a * server for outbound faxing from hylafax,
can I still use rxfax on the same server to receive faxes?
Craig
----- Original Message -----
From: "trixter http://www.0xdecafbad.com"; <[EMAIL PROTECTED]>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users@lists.digium.com>
Sent: Thursday, October 13, 2005 3:06 PM
Subject: Re: [Asterisk-Users] Which asterisk-friendly cards are fax-capable?
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
