Actually we 're running the sip protocol but in the past we did also use h323 in combination with tedas phoneware server (german voip solution). Both ran on SmartNode side very stable. Caller ID Name with sip/h323 should not be a problem, but here in Germany I'm not really shure, if the telco (T-COM) does support this feature on the PSTN side. I guess the SmartNodes should do the job anyway.
Regards Guido Hecken > Are you running SIP, or H323, or MGCP? Also, do you get callerid name > passed through? > > Guido Hecken wrote: > > We use the SmartNodes SN1400 and SN2300 as ISDN Gateways in our customer > > Asterisk installations and are really happy with them. They run very stable > > and you can configure nearly everything. Support from INALP is also great. > > With the interface cards for the SmartNode 2300 you should be able to > > connect nearly everything to VOIP. > > > > Regards > > > > Guido Hecken > > > > > >>Does anybody have any experience using a Patton SmartNode as a SIP/Telco > >>gateway with Asterisk? They seem really inexpensive and appear to > >>support all of the necessary features, but I don't have any experience > >>with their products, so I don't know if they are any good. We are > >>currently using a Cisco 2600 w/ PRI card and it works fine, but I was > >>looking for someone else as a possible alternative. Thanks. > >> > >>Peder _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
