<bump from last week> Hi all,
I have 12 SIP phones at a particular site all connected to a local asterisk server. It's in turn connected to 2 ISDN BRIs to provide up to 4 incoming calls. An IAX gateway is used for outbound calls. At the moment, when an incoming call comes in, asterisk dials every SIP phone like so: Dial (SIP/1&SIP/2&etc.) This has worked fine for some months, but I noticed a few days ago that if 2 calls come in only a second or two apart, the first one will cause the dial command to be executed, and when the second call comes in, it'll go to voicemail because *all* the SIP phones report themselves as busy (because they're ringing for the first call). Is there any way around this problem whilst keeping the same incoming call behaviour (i.e. call comes in, all phones ring)? Would it be better to do something like this using queues on a "ringall" strategy (and would it solve the problem)? Is it even possible to use queues without asterisk answering the call until it's been connected to a human being? Thanks in advance. Regards, Chris -- C.M. Bagnall, Director, Minotaur I.T. Limited This email is made from 100% recycled electrons _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
