this may work on Grandstream phones... set the ring tone to number 3
which is empty, so no tone and set the ring tone number 1 or 2 to ring
on CallerID matching (e.g. everything starting with 678 will use ring
tone 2) ... I never tested it, but the configuration shows the fields,
so it may work.....
Regards,
Marc
Stefan-Michael. Guenther (in-put GbR) wrote:
Hi,
well, some clients have strange ideas and wishes (at least to my mind).
Yesterday I gave a presentation about asterisk to a CEO.
At the end he asked me whether asterisk is able to do the following:
When a call for the CEO comes in, the calling number should be shown on the
display of his phone and the phone of his secretary. The secretary's phones
should ring, but at his phone only a light should flash.
;-)) No, turning off the sound isn't the solution.
This restriction should e.g. only apply, when it is an external call, internal
calls should result in ringing both phones.
I'm not quite sure, whether this could be a feature of asterisk or the phone
or both together.
Does anything of you successfully set up something like this or could
recommend a phone that would help/support it?
Thanks a lot in advance,
Stefan
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
voipGATE.com
Support Team
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
