As an FYI - here is the output of my TDM400P: Module 0: Installed -- AUTO FXS/DPO Module 1: Not installed Module 2: Installed -- AUTO FXO (FCC mode) Module 3: Installed -- AUTO FXO (FCC mode)
I do not have newt installed on this machine, so zttool bombs. Just sending this out as an example. Here are my zap[tel|ata] conf files: Zaptel.conf: fxols=1 fxsls=3-4 [channels] context=fxo1 signalling=fxs_ls ... channel => 3 context=fxo1 signalling=fxs_ls ... channel => 4 context=fxs1 signalling=fxo_ls ... channel => 1 The ... Represents more information that may or may not be useful...I didn't think it was necessary for this thread. And frankly, I have rambled on enough ;) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Philip Murray Sent: Wednesday, October 19, 2005 6:30 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Digium TDM400P (11B) problems Hi Rich, On 20/10/2005, at 2:42 PM, Rich Adamson wrote: >> <snip> >> >> >> dmesg: >> PCI: Found IRQ 12 for device 0000:00:0a.0 Freshmaker version: 71 >> Freshmaker passed register test Module 0: Installed -- AUTO FXS/DPO >> Module 1: Not installed Module 2: Not installed Adjusting gain Module >> 3: Installed -- AUTO FXO (NEWZEALAND mode) Found a Wildcard TDM: >> Wildcard TDM400P REV E/F (2 modules) >> > > Assuming you copy/pasted the above accurately, the output from dmesg > is missing the stuff related to Module 4. You might also try zttool to > see what it thinks is going on. That is all the output in dmesg, is there any other output in particular you were expecting? It's zero-based so Module 3 is the 4th module on the card. zttool doesn't report any alarms or anything of note. What does the loop button do? Cheers Phil Murray _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users