On Thu, Oct 20, 2005 at 10:09:01AM +1000, Howard Lowndes wrote: > There is/was a patch to * that suggested that in /channels/chan_zap.c > the variable DEFAULT_CIDRINGS should be changed from 1 to 2 to suit > Australian conditions and I had this done and everything worked.
Sorry, this probably won't help you... However, I don't think you need to change the source code, I think you can do the same thing by setting: sendcalleridafter=2 in /etc/asterisk/zapata.conf. At least this works for me. > Since I recompiled * I have lost inbound CLID recognition but have > gained the distinctive ring recognition ability which I previously > didn't have. I would speculate that distinctive ring recognition broke CLID. > I also have a Wait(2) at the start of the relevant amswering dial plan > as also recommended. I have found I don't need this. The extension file does not appear to be processed until caller-id is established. This would just add extra delay the caller must wait until the phones start ringing. In fact,if you enable callerid without callerid support on the telephone line, I noticed the phones will ring 2+ times before asterisk will detect it - as it is looking for callerid information that isn't there. So I am curious - how long is it from when the phone line starts ringing to when asterisk detects the call? I have only had some minor issues with callerid and related stuff: * on one phone it now indicates all phone calls are "OUT OF AREA". The phone number appears OK. I can't work out where this message comes from. * one another cordless phone system, it registers when there is a message waiting, but it never resets back to no message waiting, even after the message has been deleted. (Note this is using a Sipura POTS adaptor). I have: └─(13:21!505:%)── dpkg -l asterisk ──(Thu,Oct20)─┘ Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-==============-==============-============================================ ii asterisk 1.0.9.dfsg.1-3 open source Private Branch Exchange (PBX) -- Brian May <[EMAIL PROTECTED]> _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
