Okay let me share my experience. I had 'controller=1,2,3,4' and 'devices=2' in my capi.conf
Devices should be the *sum* of capacity of all controllers i.e in my case 'devices=8'. For some reason the exchange didn't like it when I had my controllers listed over mutiple lines, i.e like john's config. Caller kept getting the message "service not compatible". Hope this helps. -r On 10/20/05, John Daragon <[EMAIL PROTECTED]> wrote: > Voicomm User wrote: > > So, are you saying 'msn=' parameter is not required for both Point to > > Point and Point to Multi Point? > > > > Yep. Dial syntax used to be CAPI/<MSN>:<number> so each controller > needed at least one MSN. > > with 0.6 you can only dial by group, controller or interface name : > > > Dial(CAPI/g1/<number>) > Dial(CAPI/contr1/<number>) > Dial(CAPI/<name I gave this controller>/number) > > > You *will* have to set incomingmsn either to a real number or *. > > jd > > -- > > John Daragon [EMAIL PROTECTED] > argv[0] limited > Lambs Lawn Cottage, Staple Fitzpaine, Taunton, TA3 5SL, UK > v +44 (0) 1460 234068 f +44 (0) 1460 234069 m +44 (0) 7836 576127 > > > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
