I have the phone specific directions to transfer calls, but I tried your
suggestion. No go. I have 3 of the Eezee phones and call transfer
doesn't work on any of them, so I really don't think it is hardware
related. I think the problem may be with my feature.conf which had no
reference to blindxfer or atxfer. I added them so my feature.conf now
looks like this:
transferdigittimeout => 3 ; Number of seconds to wait between
digits when transfering a call
;courtesytone = beep ; Sound file to play to the parked caller
; when someone dials a parked call
xfersound = beep ; to indicate an attended transfer is
complete
xferfailsound = beeperr ; to indicate a failed transfer
;adsipark = yes ; if you want ADSI parking announcements
;pickupexten = *8 ; Configure the pickup extension.
Default is *8
;featuredigittimeout = 500 ; Max time (ms) between digits for
; feature activation. Default is 500
[featuremap]
blindxfer => # ; Blind transfer
disconnect => *0 ; Disconnect
;automon => *1 ; One Touch Record
atxfer => *2
I rebooted my * server but still no go. Are there dependencies I am
not aware of? Should [featuremap] be referenced elsewhere as well? I am
working with * CVS 1.0.9 and have found an article on wiki that support
for call transfer was added in 1.2. Are there other places I need to
hack for this functionality?
Thanks,
-R
Tom Vile wrote:
try # and then dial the extension.
On 10/20/05, *Rhonda Herron* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:
Hello,
I have my [EMAIL PROTECTED] working beautifully for basic call function. So
now I
am testing extended functions for my office users and am hitting a
wall.
I simply need to be able to put a call on hold and forward it to any
another internal extension. I have an Eezee AT-320 IAX2 phone and
according to the directions, I simply select Hold > enter ext>
hit Fwd.
However when I press the button all I do is annoy the caller with
loud
button punching sounds. Does something need to be configured in * to
allow call transfer to work? I am using an inbound trunk from
Teliax- no
cards, just a T1 direct to my * server. I have found transfer
functions
for zapatel- but as I said I am just using the T1 and have no zapatel
trunks/configurations. I have also seen a lot of information for call
forwarding but that sets up a permanent forward function to a
specific
extension. I just want to be able to say "One moment, Mike can
help you
with that, let me transfer you" and then be able to do it. Since this
happens with all my AT-320 phones, I don't think it is hardware
related
and there is no mention of call transfer configuration for the phone
itself.
Thanks
-R
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com
<http://Easynews.com> --
Asterisk-Users mailing list
[email protected]
<mailto:[email protected]>
http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users>
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
Tom Vile
Baldwin Technology Solutions, Inc
Consulting - Web Design - VoIP Telephony
www.baldwintechsolutions.com <http://www.baldwintechsolutions.com>
Phone: 518-631-2855 x205
Phone: 845-652-4578 x205
Phone: 978-203-3848 x205
Fax: 518-631-2856
------------------------------------------------------------------------
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
