>Hello all, >yes there is a lot of information about this on the wiki and in past posts on >this list but have not found anything that has solved my problem. >setup is: >phone-->PAP2-na-->asterisk v1.0.9(in house on local subnet dtmf is >inband)--->PSTN--->Telisip---->asterisk box at colo v1.0.9 VoIP only. I have >only access to dial up so can not go VoIP out of the house. >In extensions.conf on colo * i have some logic that based on callerid lets me >hit a single digit to get to DISA, this work every time. >the problem is that when i enter a number for DISA to dial i get duplicate >digits, example i enter 6037862111 and disa tries to dial 6003778621. I have >tried setting relaxdtmf=yes in sip.conf with no luck. I have read on the >wiki that RFC2833 should work, but alas its a no go. I am also using ulaw >which should not be distorting the dtmf through compresion, correct? Also >with RFC2833 it should not matter? Everything works great otherwise. sip.conf >for colo * is posted below:
I just setup telasip and I'm having the same issue. I captured some RTP packets and realized that when I get duplicate numbers it is because an RTP packet has arrived out of order. In all my test cases it was just one packet coming 1 packet too late, but the sequence number was correct. It seems that * instead of putting the packets back in order (using the seq numbers) makes a duplicate digit. I'm not sure if this is a bug or not (I haven't read the rfc). Thanks, Ryan _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users