mgetty dump:
10/25 11:23:17 IAX tio_get_rs232_lines: TIOCMGET failed: Invalid argument 10/25 11:23:17 ##### data dev=ttyIAX, pid=15158, caller='none', conn='DIRECT', name='', cmd='/bin/login', user='Fedora Core release 3 (Heidelberg)' -- 10/25 11:23:36 IAX mgetty: experimental test release 1.1.31-Jul24 10/25 11:23:36 IAX check for lockfiles 10/25 11:23:36 IAX locking the line 10/25 11:23:36 IAX tio_get_rs232_lines: TIOCMGET failed: Invalid argument 10/25 11:23:36 IAX WARNING: DSR is off - modem turned off or bad cable? 10/25 11:23:36 IAX lowering DTR to reset Modem 10/25 11:23:36 IAX TIOCMBIC failed: Invalid argument 10/25 11:23:36 IAX clean_line: only 500 of 4095 bytes logged 10/25 11:23:37 IAX waiting... i have in my /etc/inittab: /sbin/mgetty ttyIAX -F -r /dev/ttyIAX the -F is for Fax only and the -r is do not send modem init Then on the iaxmodem output i get a bunch of: Timestamp: 12001ms SCall: 06850 DCall: 00012 [192.168.1.1:4569] Rx-Frame Retry[ No] -- OSeqno: 003 ISeqno: 005 Type: IAX Subclass: PONG Timestamp: 12001ms SCall: 00012 DCall: 06850 [192.168.1.1:4569] Unknown IE 046 : Present Unknown IE 047 : Present Unknown IE 048 : Present Unknown IE 049 : Present Unknown IE 050 : Present Unknown IE 051 : Present Tx-Frame Retry[-01] -- OSeqno: 005 ISeqno: 004 Type: IAX Subclass: ACK Timestamp: 12001ms SCall: 06850 DCall: 00012 [192.168.1.1:4569] Unable to pass the full buffer onto the device file. -1 bytes of 4 written.Unable to pass the full buffer onto the device file. -1 bytes of 2 written.Unable to pass the full buffer onto the device file. 12 bytes of 25 written.Unable to pass the full buffer onto the device file. -1 bytes of 12 written.Unable to pass the full buffer onto the device file. -1 bytes of 2 written.Unable to pass the full buffer onto the device file. -1 bytes of 4 written.Unable to pass the full buffer onto the device file. -1 bytes of 2 written.Rx-Frame Retry[ No] -- OSeqno: 004 ISeqno: 005 Type: IAX Subclass: HANGUP Anyways.. it's a nice idea... and if spandsp supported data...it would be terrific!!! > [EMAIL PROTECTED] wrote: > >>The comment below makes me wonder could ttyIAX be configured to answer >>mgetty? >> >> > > Although I've not tried mgetty with IAXmodem, the intent was to make > this possible (for faxing), yes. > >>I have made the mgetty talk to ttyIAX however, as soon as a ring comes >>into th eextension , mgetty shuts down... so I cannot keep the signal up. >> >> > > What does the mgetty logging say about what it's doing? > >>I tried to use the pppd daemon directly with ttyIAX and it said that the >>link is in serial loopback disconnecting. >> >>Would using iaxModem be feasable for a pppd dialin, or how could I use >>mgetty with pppd to start it? >> > > spandsp (which is used by IAXmodem) does not currently support data calls. > > Lee. > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
