I would like to know why you are using two servers? Are you out of interface slots?
You stated, Sip phones registered to server B, then you say Server A routes the call to an agent. It can not be done that way. If you want server A to receive all calls and forward them to Server B, this is done using an IAX link & inbound routing. Server B receives all line information from the IAX inbound call and server B routes it to the SIP phone based on the dialplan. :) Paul -----Original Message----- From: Tielin Xu [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 25, 2005 2:16 PM To: [email protected] Subject: [Asterisk-Users] How to configure the communication between twoAsterisk servers Hi All: I have special set up to be done. See anyone can help me some ideas. Two Asterisk servers, server A trunks to PSTN, server B works as call routing engine. All sip phones are registered in server B. I have scenario like following: 1. A call comes to server A, server A sends the call related information to server B, assume that uses fast AGI. 2. Server B receives the message from server A, and look up dial plan for call routing, 3. Serve B sends the extension number back to server A, 4. Server A routes the call to the assigned agent. How does server B receive the message from server A? Many thanks for your help. Tielin Xu CTI Analyst Nintendo of America _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
