Are you using the newest drivers from Sangoma? There was an update due to the revision in asterisk/zaptel and the patch point was modified by Sangoma.
If you used CVS to obtain the latest Zaptel / or used the latest A104 drivers without the latest CVS, the patch point is wrong and Sangoma compiled wrong. Besides shouldn't it be type 2 national. Not sure if that's an option, but when I compile, I use the option 3 and the pri only needs the channels and the d chan specified. So I never noticed if it said type 2. :) Paul -----Original Message----- From: Sharon [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 25, 2005 10:37 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Sangoma A104 errors I am using a A104 Sangoma card. We are runningasterisk cvs head on our production box.After wanpipe configuration I am receiving the below mentioned error. pri show span looks good as below. pri show span 1 Primary D-channel: 24 Status: Provisioned, In Alarm, Down, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 error on the server: Write to 33 failed: Bad address Short write: 0/5 (Bad address) Any help appreciated. Thank you, _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
