I don't know if this will relate to your specific issue, but I had problems with system not responding to numbers I pressed right away when dialing internally-i.e. the dialtone did not stop like it should when system reads numbers pressed (DTMF).
I found that adjusting the rxgain and txgain in the etc/asterisk/zapata.conf file affected the responses. The defaults for both are 0.0 and apparantly represent percentage. Too high makes feedback, too low and system will not respond. With my TDM11B I have rxgain at 6.0 and txgain at 3.0 right now, but I am still working out playback volume and IVR responses. that's all I got Neil T. Skowronek --- Jonathan Feally <[EMAIL PROTECTED]> wrote: > I seem to be missing something here. Basically I'm > trying to do what a > full CO would do in terms of *70 to disable call > waiting. > I have a *70 exten setup, it does the work to set > the extension to not > take in a second call, then does a > playtones(dialrecall). This works > except that all digits dialed after the *70 have the > tone still playing > until the dialplan kicks back in for the new exten > dialed. Does somebody > have a work around for this? I'd prefer to not use > Background. > > Thanks, -Jon > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com > -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
