|
Hi Thanks for the reply I do actually use the |q
option to disable the enter/exit sounds. Steven > Message: 15 > Date: Thu, 27 Oct 2005
10:25:32 -0500 > From: "Eric
\"ManxPower\" Wieling" <[EMAIL PROTECTED]> > Subject: Re:
[Asterisk-Users] Re: delays with IAX2 and Meetme > To: Asterisk Users
Mailing List - Non-Commercial Discussion > Message-ID:
<[EMAIL PROTECTED]> > Content-Type:
text/plain; charset=ISO-8859-1; format=flowed > Steven Langley wrote: >> Hi Tony >> >> >> >> Thanks for the
reply and for posting the code. I added the code and >> recompiled
Asterisk, but unfortunately it did not resolve the issue. It >> basically trapped
all of the incoming audio and wrote to the error log >> instead of
outputting it. So basically it never seemed to go to the >> careful_write
statement. >> >> >> >> To answer your
questions: Firstly, I am using kernel 2.6, but am not using >> Ztdummy. I am using
a digium card for timing. I have run a test on it, and >> it seems to be
working properly. >> >> >> >> I am using a client
built using IaxClient, and am now looking at the >> possibility that
the delay might be a client issue instead of a server >> issue. What is the
best tool to use to run tests on my server and clients to >> narrow down the
source of the delay? > > >I'm pretty sure this is
a known issue with enabling meetme enter/exit >sounds. Turn them off (q option to MeetMe, I
think) |
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
