Just added a TDM400p
with 2 fxs ports to asterisk so that I could hook up our fax lines, ztcfg shows
the card being detected and configured correctly (fxo_ks signalling)
Zapata.conf
[channels]
context=incoming
signalling=pri_cpe
switchtype=national
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
channel => 1-12
context=incoming
signalling=pri_cpe
switchtype=national
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
group=1
channel => 1-12
context=analogint
signalling=fxo_ks
language=en
group=2
channel => 15-16
signalling=fxo_ks
language=en
group=2
channel => 15-16
also "zap
show channel 15" shows no problems, likewise with "zap show
status"
slots 3&4 on the
card are populated... dialing the channels produces no rings, and no
errors
no dialtone.
the card used to have fxo modules (I switched them) aux power connector is
attached.
I'm stuck, any help
would be appreciated.
Thanks,
Jay
Bhatt
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
