Check the mailing list archives... I think the newest code has the fix.
Workaround for older versions is to Answer before Dial, but you may still need the 'r' option to Dial as ringing may stop for the caller after about 10 seconds.
On 10/27/05, OTR Comm <[EMAIL PROTECTED]> wrote:
Hello all,
I have a problem calling into asterisk on a PRI going out to a SIP phone
(PRI -> SIP). The calling party does not hear ringing and after about five
seconds gets an *All circuits are busy* recording. However, the called SIP
phone does ring, and if the called party answers the phone within a few
seconds, the call stays in service.
CLI messages:
...
-- Accepting call from '9288532045' to '6023432727' on channel 0/23,
span 1
-- Executing Dial("Zap/23-1", "SIP/102|20|rt") in new stack
-- Called 102
!! Don't know how to add an IE High-layer Compatibility (125)
!! Unable to add IE 'High-layer Compatibility'
-- SIP/102-935d is ringing
-- Channel 0/23, span 1 got hangup request
== Spawn extension (incoming, 6023432727, 1) exited non-zero on 'Zap/23-1'
-- Hungup 'Zap/23-1'
...
NOTE: There is no problem calling from SIP phone out (SIP -> PRI).
Any body ever have this problem?
Thanks,
Murrah
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
