I've had similar problems with no fix. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Boris Bakchiev Sent: Thursday, October 27, 2005 10:02 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Echo canceller on TE406 & Asterisk
Hi, I have TE406P (2nd gen card with echo cancellation on-board). We still notice quite often echo on our PBX that is connected to one of the spans on TE406P (with calls routers to PRI provider on another span). I've tried to experiment with the echo cancellation on asterisk. I enabled echo cancellation in Zapata.conf to see if I can improve the situation and users started reporting "warping bubble" (description I got from one of the users) sound on calls from PABX->Asterisk->PRI (and other way). I was expecting that asterisk would disable its echo cancellation once it find on-board module. The strange thing I noticed that after system reboot things are now better. Although I cannot say for sure because the system was ever rebooted 2 times. Can anyone shed some light on this? Has anyone had similar problems? Or point me into right direction for troubleshooting? Regards Boris _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
