Chris, I wrote a post that contains the information (files) you need for the asterisk tftpboot directory to load a 7960 Sip 7.5 image from the server.
See this post https://sourceforge.net/forum/message.php?msg_id=3374221 As far as obtaining the SIP 7.5 software, I see it on EBay all the time for $12.00 buy it now. If you follow my directions about what files to place in the tftpboot directory, and modify your alternate boot server on the 7960, the phone will load the sip software. I personally learned by using SolarWinds TFTP server from my XP station so I could see the file name requests as they were being transferred. On a new Cisco phone, you would set the alternate tftp server to yes then set the ip address of the alternate tftp server to the server with the images to upload. If you need to unlock the phone it can be **# or cisco based on the version loaded. I also was interested in the SCCP driver. I was able to load the driver in Asterisk (AND SEE IT) but could not get it to work. I did ask for a users guide but there is not one available yet. So I think SIP will be the easiest for you to use for you client proposal. When time permits, I'll go back and look over the sccp driver and find my mistakes. :) Paul Norris > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Chris Bagnall > Sent: Sunday, October 30, 2005 12:04 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] SCCP support is making good progress > > > whoever owns a Cisco phone and is unhappy about slow > > firmware, incomplete XML support etc... should really have a > > look at Sergio Chersovani's rewrite of chan-sccp! > > Is there a good resource out there for people who don't have a lot of > experience with Cisco phones? I picked up a 7960 earlier this week to give > potential clients an example of what they get when they spend a *lot* of > money on IP phones, but I must confess I'm having a nightmare of a time > trying to configure it. > > The main problem seem to be that I have nothing but a phone and a brief > licence agreement/regulatory approval sheet, and nothing else. I've > trawled > through the numerous pages about these phones both on Cisco's website and > on > voip-info, but I'm still not really sure what files I need to have on the > TFTP server to get the phone going in the first place, or find some > up-to-date examples to work from. Even after that I'm not sure I'll be > able > to upgrade the firmware without a Cisco service agreement (from what I've > read), which is ridiculous for a phone that's twice as expensive as many > other enterprise IP phones. > > Any suggested reading others on the list have found helpful in this > scenario? > > Thanks in advance. > > Regards, > > Chris > -- > C.M. Bagnall, Director, Minotaur I.T. Limited > This email is made from 100% recycled electrons > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
