Hi,
Am having a problem with Zap group channels. Wondering if anyone has
seen the same and if there is a quick solution.
I have bonded multiple zap channels to a group for outbound calling,
e.g. channels 3 and 4 are in Zap/g2.
We have an intermittent problem with our PSTN provider in that from time
to time the POTS line on channel 3 is not operative i.e. no dial tone.
The problem resolves itself after a few hours usually and we're back to
normal.
The problem is that during the outage, Asterisk doesn't recognize that
there is no dial tone on channel 3 and still passes the call to that
channel. Obviously the call is never completed and the caller has no
idea why. I have tried to alter the order that Asterisk chooses
outbound channels but haven't had any success. So, my questions are:
1) How to force asterisk to choose the order of lines in a channel
group, and
2) If there is a conf variable that will effect asterisk in a way so
that it recognizes there is no dial tone on a line.
Am using the basic zapata.conf for asterisk example config, with
following channel specific settings
; FXO lines (incoming from PSTN)
context=pstn-in
group=2
signalling=fxs_ks
channel=4,3
busydetect=yes
Thanks,
Rob
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
