Hi. Which Cisco firmware are you using? There's a known problem with lost of registration with SIP 7.5 firmware and you need to reboot the phone in order to re-register. If you're using this one, try to downgrade to 7.4.
Braz -----Message d'origine----- De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Geoff Manning Envoyé : 1 novembre, 2005 15:10 À : Asterisk Users (E-mail) Objet : [Asterisk-Users] Slightly OT: Cisco 7960/7940 and AsteriskRegistration Issues ove r a WAN We are using Cisco 7960 and 7940 phones to connect to a remote Asterisk server over DSL. They work fine from boot up but after half a day they stop registering. They are set to register every 60 seconds. They need to be rebooted in order to register again. When we look at the log on the modem we see loads of SIP port limit exceeded errors. We have gone through a few modems (Cenexant and Zoom modems). Is anybody using such a setup as I've described? Or any hard IP phone to a remote asterisk server via DSL? If so, what modem are you using? Thanks, Geoff _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
